DIN929 焊接六角螺母 hexagon weld nuts GB/T13681-92
螺纹规格
D | |
| P | 螺距 | 粗牙 | | 细牙1 | | 细牙2 | | b | 公称 |
| | 最大值 |
| | 最小值 |
| | d1 | 公称 (d11) |
| | 最大值 |
| | 最小值 |
| | d2 | 最小值=公称 (H13) |
| | 最大值 |
| | d3 | 最大值 |
| | e | 最小值 |
| | h1 | 最大值 |
| | 最小值 |
| | h2 | 最大值 |
| | 最小值 |
| | m | 最大值=公称 (h14) |
| | 最小值 |
| | s | 最大值=公称 (h13) |
| | 最小值 |
| | 千件重(钢制)≈kg |
| | 保证载荷(N) | 粗牙 |
| | 细牙1 |
| | 细牙2 |
|
| | 0.5 | 0.7 | 0.8 | 1 | 1.25 | 1.5 | / | / | 1.75 | 2 | 2 | | / | / | / | / | 1 | 1.25 | / | / | 1.25 | 1.5 | 1.5 | | / | / | / | / | / | 1 | * | * | 1.5 | / | / | | 0.80 | 0.80 | 0.80 | 0.90 | 1.00 | 1.25 | 1.25 | 1.25 | 1.25 | 1.50 | 1.50 | | 1.00 | 1.00 | 1.00 | 1.12 | 1.25 | 1.55 | 1.55 | 1.55 | 1.55 | 1.90 | 1.90 | | 0.60 | 0.60 | 0.60 | 0.68 | 0.75 | 0.95 | 0.95 | 0.95 | 0.95 | 1.10 | 1.10 | | 4.50 | 6.00 | 7.00 | 8.00 | 10.50 | 12.50 | 12.50 | 13.50 | 14.80 | 16.80 | 18.80 | | 4.47 | 5.97 | 6.96 | 7.96 | 10.45 | 12.45 | 12.45 | 13.45 | 14.75 | 16.75 | 18.735 | | 4.395 | 5.895 | 6.87 | 7.87 | 10.34 | 12.34 | 12.34 | 13.34 | 14.64 | 16.64 | 18.605 | | 4.50 | 6.00 | 7.00 | 8.00 | 10.50 | 12.50 | 13.50 | 13.50 | 14.80 | 16.80 | 18.80 | | 4.68 | 6.18 | 7.22 | 8.22 | 10.77 | 12.77 | 13.77 | 13.77 | 15.07 | 17.07 | 19.13 | | 3.15 | 4.2 | 5.25 | 6.3 | 8.4 | 10.5 | 11.7 | 11.7 | 12.6 | 14.7 | 16.8 | | 8.15 | 9.83 | 10.95 | 12.02 | 15.38 | 18.74 | 18.74 | 20.91 | 20.91 | 24.27 | 26.51 | | 0.55 | 0.65 | 0.7 | 0.75 | 0.9 | 1.15 | 1.15 | 1.4 | 1.4 | 1.8 | 1.8 | | 0.45 | 0.55 | 0.6 | 0.6 | 0.75 | 0.95 | 0.95 | 1.2 | 1.2 | 1.6 | 1.6 | | 0.25 | 0.35 | 0.4 | 0.4 | 0.5 | 0.65 | 0.65 | 0.8 | 0.8 | 1 | 1 | | 0.15 | 0.25 | 0.3 | 0.3 | 0.35 | 0.5 | 0.45 | 0.6 | 0.6 | 0.8 | 0.8 | | 3 | 3.5 | 4 | 5 | 6.5 | 8 | 10 | 10 | 10 | 11 | 13 | | 2.75 | 3.2 | 3.7 | 4.7 | 6.14 | 7.64 | 9.64 | 9.64 | 9.64 | 10.57 | 12.57 | | 7.5 | 9 | 10 | 11 | 14 | 17 | 17 | 19 | 19 | 22 | 24 | | 7.28 | 8.78 | 9.78 | 10.73 | 13.73 | 16.73 | 16.73 | 18.67 | 18.67 | 21.67 | 23.67 | | 0.78 | 1.13 | 1.73 | 2.5 | 5.27 | 9.58 | 12 | 14 | 13.7 | 21.3 | 28.5 | | 3800 | 6800 | 11000 | 15500 | 28300 | 44800 | / | / | 65300 | 89700 | 123000 | | / | / | / | / | 30200 | 47800 | / | / | 72100 | 97500 | 132000 | | / | / | / | / | / | 50200 | 53600 | 53600 | 68200 | / | / |
|
①,英寸：7/16-20 UNF-2B [ASME B 1.1]
②,材料：
碳含量不超过0.25%的钢 ,其他类型钢材经协议 |
| 材料 | | 通用要求 | | 螺纹 | 公差 |
| | 标准 |
| | 机械性能 | | 公差 | 产品等级 |
| | 标准 |
| | 表面处理 | | 验收及包装 |
| 钢（St）：C ≤ 0.25%
其他材料按协议 | | DIN ISO 8992 | | 6G | | DIN 13-1，DIN 13-5，DIN 13-6，DIN ISO 965-1 | | DIN EN ISO 898-2 | | A | DIN EN ISO 4759-1
DIN 267-2 | blank
电镀 DIN EN ISO 4042
In the case of bare weld nuts, corrosion can already occur during storage or transport. The manufacturer must take suitable measures to protect against corrosion during transport without impairing the weldability. | | DIN EN ISO 3269 |
|
